Installation vacuum VTT 900 DUO for drawing the strengthening, protective and decorative coverings
- Customer pickup,
- In detail
The vacuum VTT 900 DUO installation is intended for drawing the strengthening, protective and decorative coverings by method of magnetron and arc dispersion from electrowire refractory materials (Ti, Mo, Zr, etc.).
Distinctive feature of this vacuum installation:
- existence of two doors that allows to accelerate and facilitate loading of napylyaemy products significantly;
- otkachny the branch pipe is executed on all height of a chamber;
- possibility of installation of technological sources in different provisions.
1. Internal diameter of a chamber is D=850 mm.
2. Mm H=1300 camera height.
3. Limit residual vacuum of 2х10-3 Pas.
4. The power consumed by installation:
- in the mode of pumping of 11 kW;
- in the mode of drawing coverings from 40 to 65 kW (depending on the applied sources)
Structure of installation.
|No. of a payment order||Name||Quantity|
|1||The magnetron evaporator with a working zone to 1100 mm with power supplies||4|
|2||Installation of arc planar evaporators with circulation of an arch with a working zone to 1200 mm is possible||4|
|3||Ionic source of cleaning and assistance||1|
|4||Power supply unit of basic/high||1|
|5||Industrial equipment (the industrial equipment in coordination with the customer is possible)||1|
|6||Heaters managements with the temperature of substrate, intra chamber with an opportunity, up to 600 ˚ With||4|
|7||The forvacuum unit 2 AVZ 20/ND 500 (the complete set pumps of the German firm PFEIFFER is possible)||1|
|8||High-vacuum otkachny the module on the basis of the diffusive pump ND 400||1|
|9||Lock high-vacuum air-controlled and possibility of a drosselirovaniye of pumping||1|
|10||System pneumatic on the basis of the SMC elements.||1|
|11||System hydraulic on the basis of the SMC elements.||1|
|12||Control system on the basis of the industrial Siemens controller||1|